Best Salt for Water Softener: Pellets or Crystals
When maintaining your water softener, one important decision is choosing between salt pellets or crystals. This choice is important because the right type of salt will keep your water softener working well and help it last longer. We generally have two options for water softener salt: salt pellets and salt crystals. Some systems work better with pellets, while others are suited for crystals. It’s important to consider the advantages of each type before deciding what’s best for your system. In this article, we’ll let you decide the best salt for water softener pellets or crystals, their benefits, and how to choose between them.
Understanding Salt Pellets and Crystals
Water softeners are devices that remove minerals like calcium and magnesium from water. These minerals are not bad for your health. Still, they can damage your home appliances, like scale build-up in pipes and appliances, make soap harder to use, and make clothes feel stiff or dull. Any water softener salt, whether in pellets or crystal form, is responsible for eliminating these minerals from the water. Your water-softening device performance depends on the type of salt you use. Other effective options besides the commonly used salt and sodium chloride are available on the market.
Pellets and crystals differ in their dissolving rate, purity, and reliability in the brine tank. Each one has its benefits. The best choice depends on factors like your water softener model, water hardness level, and preference. Knowing the different types of water softener salt and their effectiveness can help you make a smart choice. This can improve how well your water softener works, make your appliances last longer, and improve water quality at home.
Why does the right salt matter for your water softener?
The type of salt you use is responsible for how often your water softener needs maintenance and the bridging chances. Bridging happens when salt sticks together and forms a hard crust, like a bridge, blocking the salt from reaching the water in the tank. Salt with more impurities is more likely to cause bridging than purer salt. This problem usually happens deep in the tank, so it often goes unnoticed until the water quality is highly affected. Once bridging starts, you need to break it up by hand so the salt can flow again. One way to fix it is by pouring hot water over the crust until it is removed.
Salt Pellets
Salt pellets are made from pure sodium chloride, which comes from refined crystals. They dissolve easily in water and don’t cause clogging, bridging, or leave any waste. This helps your water softener run longer without any requirement for frequent maintenance. Pellets are the most expensive type because they go through extra steps to make them purer.
Benefits of Salt Pellets
Salt pellets are bigger than salt crystals and are made from pure sodium chloride or refined salt crystals. Though they cost more, pellets don’t have the extra additives that crystals do, so they dissolve more easily in water without leaving any residue. Using salt pellets can lower the amount of maintenance your water softener needs and help prevent salt bridges from forming.
Salt Crystals
Salt crystals are made from evaporated salt, brine, and water, leaving 99.6% sodium chloride behind. They usually have additives and are efficient in households with a two-part water-softening system. Crystals can cause bridging more easily in homes with regular or high water use, but they are an affordable choice for homeowners.
Benefits of Salt Crystals
Salt crystals are smaller than salt pellets and contain salt, brine, and water. They usually contain additives and are usually recommended for two-part water softeners. Salt crystals are affordable options for homeowners who consume limited water for their regular use. However, you need to watch out for bridging, which can cause problems. Regular maintenance is important to keep your water softener working well when using crystals.
What to Use Salt Pellets or Crystals?
The choice of water softener salt pellets and salt crystals depends on specific conditions such as the water softener model, The water hardness in your location, and other factors like maintenance, cost, and the members present in the home, which indicates the water consumption. Pellets are the purest form, need lesser maintenance, and are highly efficient in softening the water in bigger households. At the same time, crystals contain additives and are affordable choices widely used in smaller households or locations where the water hardness is low.
If you are looking for reliable water softener salt, we are here for you! At Canada Salt Group Ltd, we provide high-quality water softener salt in bulk to keep your water softener running efficiently. Our products help prevent issues like bridging and ensure your system performs efficiently. Feel free to reach out to us if you need affordable options or premium quality. Contact us today to find the perfect solution and keep your water softener in top condition!
